Product Details:
Payment & Shipping Terms:
|
Material: | GI | Thickness: | 1.2-2.5mm |
---|---|---|---|
Power: | 380V,3P,50HZ | Stations: | 24 |
Operate: | PLC | Weight: | 14ton |
High Light: | metal deck forming machine,floor deck roll forming machine |
Name |
Item |
Specification |
Coil requested |
Material |
galvanized steel |
thickness |
1.2-2.5mm |
|
Tensile strength |
235Mpa |
|
Coil width |
1000mm |
|
Decoiler(1 unit) |
Type and weight capacity |
Manual decoiler, 10T |
Inner diameter |
498-508mm |
|
Outer diameter |
Max:1200mm |
|
Rollforming machine |
Rolling speed |
10m/min |
Motor |
11KW, 3phase, 60Hz, 380V |
|
Rolling step |
24 |
|
Driving system |
Chain transmission |
|
Structure of machine body |
Entire wall steel structure |
|
Material of roller |
45# steel, chromed thickness0.05mm |
|
Diameter of shaft |
75mm |
|
Dimession |
Abt.12m*1.5m*1.1m |
|
Weight |
Abt.14T |
|
Electric control cabinet(1 unit) |
Main component |
PLC, frequency convertor, |
Cutting and length measurement |
Automatic |
|
Brand |
Panasonic from Japan, can |
|
Hydraulic station (1 unit) |
Power and strength |
3.5KW, 16Mpa |
Cutting machine(1 unit) |
Material of blade |
GCr12 mov steel, heatment and |
Cutting type |
Hydraulic cutting |
|
Run out table(1 unit with 4 pieces) |
Size |
1.2m*0.7m*1m*4 |
Working flow:
Manual decoiler---Guiding&feeding----Rollforming----Hydraulic cutting----Run out table
Roll forming main machine
(1) Motorized Pre-cutting: It is used when changing the coil of raw material; it can
cut the coil rapidly and time-saving.
(2) Hydraulic Cutting after forming: Cut the sheet after roll forming to required
length
(3) Cutting motion: The main machine automatically stops and the cutting will take
place. After the cutting, the main machine will automatically start.
(4) Material of blade: CR12with heat treatment
(5) Length measuring: Automatic length measuring
(6) Tolerance of length: 3m+/- 1.5mm
Contact Person: Mr.wang
Tel: +8615261519246